Home / Products / 5410530126 Valve Collet for MTU 2000 – Exploded View & Parts List

5410530126 Valve Collet for MTU 2000 – Exploded View & Parts List

5410530126 Valve Collet for MTU 2000 – Exploded View & Parts List

Part No. 5410530126 · Model: MTU 2000
Genuine Original Worldwide Shipping
Part No.5410530126
ModelMTU 2000
ApplicationCylinder Head assembly (drawing E04100002a)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5410530126

MTU 2000 cylinder head exploded view, drawing E04100002a
C/N Part Number Description Qty U/M Dimension
1 5410500226 VALVE 16 EA
2 5410500227 VALVE 16 EA
3 5410530020 VALVE SPRING 32 EA
4 3669900240 WASHER 32 EA
5 5410530225 VALVE SPRING RETAINER 32 EA
6 5410530126 VALVE COLLET 64 EA
7 0000533558 GASKET 32 EA
8 5410550374 PIN 16 EA
Drawing E04100002a · 8 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 2000 series.

Below is drawing E04100002a of the MTU 2000 series cylinder head assembly, followed by its full parts list. All 8 positions on the drawing are listed with part number, description, quantity, unit and dimension, so a position number seen on the engine can be matched to an orderable part number.

Reading Drawing E04100002a

The drawing is a service illustration, not a photograph: parts are separated along the assembly axis and numbered in the order they are fitted. Read a position number from the drawing, find the same number in the C/N column, and the row gives you the part number to order.

The cylinder head group covers valve, valve spring, washer and valve spring retainer among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 1 engine variants:

8V 2000 G20-G60

The illustration is typical for the cylinder head group and is used across 1 engine variants, so the same position may carry a different part number on an early or late build. The quantity column reflects the variant catalog reproduced here; if your engine plate shows a different rating or serial range, send it and we will confirm the correct number before shipping.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E04100002a?

Yes. All 8 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Service Notes

This drawing carries valve, valve spring, washer, valve spring retainer and valve collet, among other positions. A cylinder head overhaul normally replaces the valve springs, valve seats and stem seals as a set, together with the head gasket and the head bolts, which are torque-to-yield and not reused. Guides and seat rings are renewed when the wear limit is reached.

Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.

Other Drawings in This Group

The same cylinder head group is covered by further drawings in the MTU 2000 / 4000 series catalog:

Inquire About This Part