Home / Products / 5241800247 Lubricating Oil System for MTU 4000 – Parts List

5241800247 Lubricating Oil System for MTU 4000 – Parts List

5241800247 Lubricating Oil System for MTU 4000 – Parts List

Part No. 5241800247 · Model: MTU 4000
Genuine Original Worldwide Shipping
Part No.5241800247
ModelMTU 4000
ApplicationLubricating Oil System assembly (drawing E1833024a0)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5241800247

MTU 4000 lubricating oil system exploded view, drawing E1833024a0
C/N Part Number Description Qty U/M Dimension
1 700429075001 O-RING 4 EA 75 X 5
2 5242030127 GUIDE SLEEVE 4 EA
3 0001880946 FIRST PLATE 1 EA
4 0001880846 PLATE 36 EA
5 0001881546 END PLATE 1 EA
6 5241800247 COVER PLATE 1 EA
7 5241880653 SPACER SLEEVE 10 EA L=95.0
8 000000000360 SCREW 2 EA M 16 X 180
8Z 200933016009 SCREW 8 EA M 16 X 250
9 8809900340 WASHER 10 EA
Drawing E1833024a0 · 10 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 4000 series.

This drawing shows the lubricating oil system assembly of the MTU 4000 series engine, exploded so that every position is visible at once. The table below it is the complete parts list for the drawing: 10 positions with the part number, description, quantity, unit of measure and dimension for each.

Reading Drawing E1833024a0

The drawing is a service illustration, not a photograph: parts are separated along the assembly axis and numbered in the order they are fitted. Read a position number from the drawing, find the same number in the C/N column, and the row gives you the part number to order.

The lubricating oil system group covers o-ring, guide sleeve, first plate and plate among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 11 engine variants:

12V 4000 M60/7012V 4000 M60/9012V 4000 R20 R1016V 4000 M50B16V 4000 M60-9016V 4000 M7016V 4000 M908V 4000 M40A8V 4000 M60-M708V 4000 M60/708V 4000 M70

The illustration is typical for the lubricating oil system group and is used across 11 engine variants, so the same position may carry a different part number on an early or late build. The quantity column reflects the variant catalog reproduced here; if your engine plate shows a different rating or serial range, send it and we will confirm the correct number before shipping.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E1833024a0?

Yes. All 10 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Service Notes

This drawing carries o-ring, guide sleeve, first plate, plate and end plate, among other positions. Oil system overhauls replace the pump sealing rings, suction pipe gaskets and all O-rings on the circuit. Oil lines and banjo unions are renewed when the sealing faces are marked, and the filter element is changed at the same time.

Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.

Other Drawings in This Group

The same lubricating oil system group is covered by further drawings in the MTU 2000 / 4000 series catalog:

Inquire About This Part