Home / Products / 5621531140 Monitoring & Control for MTU 2000 – Parts List

5621531140 Monitoring & Control for MTU 2000 – Parts List

5621531140 Monitoring & Control for MTU 2000 – Parts List

Part No. 5621531140 · Model: MTU 2000
Genuine Original Worldwide Shipping
Part No.5621531140
ModelMTU 2000
ApplicationMonitoring, Control and Governing Equipment assembly (drawing E50700007a)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5621531140

MTU 2000 monitoring, control and governing equipment exploded view, drawing E50700007a
C/N Part Number Description Qty U/M Dimension
1 5315400173 RETAINER 4 EA
2 5315400273 RETAINER 8 EA
3 5315400373 RETAINER 10 EA
4 0015331840 RETAINER 49 EA DN10
5 0005335043 BRACKET 50 EA BUEGEL FUER HALTER DN10
6 200084005102 SCREW 49 EA M 5 X 12
7 200125005300 WASHER 49 EA A 5.3
8 000934005024 HEX NUT 49 EA M 5
9 5621531140 RETAINER 1 EA
10 000084005196 SCREW 1 EA M 5 X 12
11 007349005002 WASHER 6 EA 5.3
12 000934005004 HEX NUT 1 EA M 5
Drawing E50700007a · 12 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 2000 series.

Below is drawing E50700007a of the MTU 2000 series monitoring, control and governing equipment assembly, followed by its full parts list. All 12 positions on the drawing are listed with part number, description, quantity, unit and dimension, so a position number seen on the engine can be matched to an orderable part number.

Reading Drawing E50700007a

The drawing is a service illustration, not a photograph: parts are separated along the assembly axis and numbered in the order they are fitted. Read a position number from the drawing, find the same number in the C/N column, and the row gives you the part number to order.

The monitoring, control and governing equipment group covers retainer, bracket, screw and washer among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 9 engine variants:

12V 2000 M40-M6012V 2000 M50A12V 2000 M60/70/9012V 2000 M60/9012V 2000 M60/9116V 2000 M40-M5016V 2000 M6016V 2000 M60-9016V 2000 M60-91

The illustration is typical for the monitoring, control and governing equipment group and is used across 9 engine variants, so the same position may carry a different part number on an early or late build. The quantity column reflects the variant catalog reproduced here; if your engine plate shows a different rating or serial range, send it and we will confirm the correct number before shipping.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E50700007a?

Yes. All 12 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Service Notes

This drawing carries retainer, bracket, screw, washer and hex nut, among other positions. Fuel system repairs normally renew the sealing rings and copper washers on every union that is opened, together with the fuel hoses and clamps in the same circuit. Injector seats and return-line seals are replaced whenever an injector is removed.

Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.

Other Drawings in This Group

The same monitoring, control and governing equipment group is covered by further drawings in the MTU 2000 / 4000 series catalog:

Inquire About This Part