Home / Products / 0005461220 Ground Strap for MTU 4000 – Exploded View & Parts List

0005461220 Ground Strap for MTU 4000 – Exploded View & Parts List

0005461220 Ground Strap for MTU 4000 – Exploded View & Parts List

Part No. 0005461220 · Model: MTU 4000
Genuine Original Worldwide Shipping
Part No.0005461220
ModelMTU 4000
ApplicationMonitoring, Control and Governing Equipment assembly (drawing E5073015d3)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 0005461220

MTU 4000 monitoring, control and governing equipment exploded view, drawing E5073015d3
C/N Part Number Description Qty U/M Dimension
1 0005337154 DAMPER ELEMENT 4 EA
2 5241530540 RETAINER 1 EA
3 5241530740 RETAINER 1 EA
4 8332030053 SPACER TUBE 2 EA
5 304017008079 SCREW 10 EA M 8 X 20
6 304017008085 SCREW 2 EA M 8 X 40
7 0005461220 GROUND STRAP 1 EA QUERSCHNITT 6QMM. LAENGE 200MM
8 5261530037 STRIP 2 EA
9 000933010035 SCREW 4 EA M 10 X 25
10 007349010002 WASHER 4 EA 10.5
11 009021010201 WASHER 4 EA 10.5
12 5241500773 RETAINER 1 EA
13 5511531250 SPACER BUSHING 2 EA
14 304017008087 SCREW 2 EA M 8 X 50
15 5241533240 RETAINER 1 EA
16 5531530153 SPACER BUSHING 1 EA
17 304017008090 SCREW 2 EA M 8 X 70
Drawing E5073015d3 · 17 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 4000 series.

This drawing shows the monitoring, control and governing equipment assembly of the MTU 4000 series engine, exploded so that every position is visible at once. The table below it is the complete parts list for the drawing: 17 positions with the part number, description, quantity, unit of measure and dimension for each.

Reading Drawing E5073015d3

Position numbers on the drawing correspond one-to-one with the C/N column of the table. Where a position carries more than one piece, the quantity column gives the count for a single assembly, which is what you need when ordering a complete set of seals, bolts or washers.

The monitoring, control and governing equipment group covers damper element, retainer, spacer tube and screw among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 5 engine variants:

12V 4000 M60/7012V 4000 M60/9016V 4000 M708V 4000 M60/708V 4000 M70

Because this drawing is shared by 5 engine variants, minor differences exist between builds. The parts list above follows one catalog variant, and quantities are per single engine assembly. Send your engine serial number if you need the list checked against a specific build.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E5073015d3?

Yes. All 17 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Service Notes

This drawing carries damper element, retainer, spacer tube, screw and ground strap, among other positions. Fuel system repairs normally renew the sealing rings and copper washers on every union that is opened, together with the fuel hoses and clamps in the same circuit. Injector seats and return-line seals are replaced whenever an injector is removed.

Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.

Other Drawings in This Group

The same monitoring, control and governing equipment group is covered by further drawings in the MTU 2000 / 4000 series catalog:

Inquire About This Part