5550111610 Cylinder Liner for MTU 331 / 396 Series
5550111610 Cylinder Liner for MTU 331 / 396 Series
| Part No. | 5550111610 |
| Model | MTU 331 / 396 Series |
| Application | Cylinder Liner — Crankcase |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 5550111610
| Pos | Part No. | Designation | Qty | Unit | Measurement |
|---|---|---|---|---|---|
| 01 | 007603045101 | SEALING RING | 1 | EA | A 45 X 52 |
| 02 | 000908045003 | PLUG | 1 | EA | M 45 X 1.5 |
| 03 | 007603056100 | SEALING RING | 1 | EA | A 56 X 64 |
| 04 | 000908056000 | PLUG | 1 | EA | M 56 X 2 |
| 05 | 0000110032 | COVER | 16 | EA | |
| 06 | 5500110132 | COVER | 1 | EA | |
| 07 | 700429075002 | O-RING | 2 | EA | 75 X 3.5 |
| 08 | 000125008427 | WASHER | 4 | EA | A 8.4 |
| 09 | 000933008115 | SCREW | 4 | EA | M 8 X 25 |
| 10 | 5550101251 | OIL SPRAY NOZZLE | 8 | EA | |
| 11 | 000137008203 | SPRING WASHER | 16 | EA | B 8 |
| 12 | 000933008242 | SCREW | 16 | EA | M 8 X 65 |
| 13 | 5550111610 | CYLINDER LINER | 16 | EA | |
| 13A | 5550111710 | CYLINDER LINER | 1 | EA | |
| 13B | 5550111810 | CYLINDER LINER | 1 | EA | |
| 13C | 5550111910 | CYLINDER LINER | 1 | EA | |
| 13D | 5550112010 | CYLINDER LINER | 1 | EA | |
| 13E | 5550112110 | CYLINDER LINER | 1 | EA | |
| 14 | 5500110559 | O-RING | 16 | EA | |
| 15 | 5550110059 | SEALING RING | 16 | EA | |
| 16 | 5500110659 | SEALING RING | 16 | EA | |
| 17 | 5550110159 | SEALING RING | 16 | EA |
Part number 5550111610 is the cylinder liner used on the MTU Series 331 / 396. Below you will find the factory parts list for the assembly it belongs to, an explanation of its function in the crankcase, the checks to make before ordering, and the parts that are normally replaced with it.
In the factory parts list for this engine the number is listed at position 13 of drawing E010054a0, with a quantity of 16 per assembly.
What the Cylinder Liner Does on the MTU 331 / 396
The cylinder liner forms the working bore of the cylinder. The piston rings run directly against its honed surface, so the liner has to hold a true round bore, carry heat from the piston into the cooling jacket and resist the side loads of the connecting rod. On a wet liner design it also seals combustion gas and coolant apart at the top and bottom seats.
Liners are replaced when the bore is worn past the plating or honing limits, when there is scoring or scuffing from a piston seizure, or when pitting and cavitation erosion appear on the water side. Typical symptoms are rising lube oil consumption, blue smoke, crankcase pressure, poor compression on one cylinder and coolant contamination of the oil.
Where 5550111610 Sits in the Engine
On the engine this component is part of the Crankcase, published on drawing E010054a0. Ratings within the series differ in turbocharging, injection equipment and cooling layout, so confirm the position against your engine rather than against the model name alone.
The drawings for this number list it for 12V331TB82, 12V331TC82, 12V331TC92, 12V396TB14, 12V396TB34, 12V396TB34D, 12V396TB34R, 12V396TB82, 12V396TB93, 12V396TB94.
Parts Normally Renewed With 5550111610
A liner is never changed on its own. The piston, rings, liner seals and the head gasket on that cylinder are renewed at the same time, otherwise the new bore is contaminated by the old rings and the joint has to be opened again.
- 007603045101 — SEALING RING
- 000908045003 — PLUG
- 007603056100 — SEALING RING
- 000908056000 — PLUG
- 0000110032 — COVER
- 5500110132 — COVER
Confirming 5550111610 Fits Your Engine
The number on the engine is the only reliable reference. Confirm the following:
- That 5550111610 appears in the parts list for your exact engine serial number
- That the designation on the engine data plate matches this cylinder liner
- Whether a later revision has superseded the number fitted to your engine
- The quantity required — the table above lists the factory quantity for this assembly
Supply, Lead Time and Documentation
We quote within one working day. Items in stock leave the warehouse immediately; where a part has to be sourced, we give you the expected date before you place the order. Air and sea freight are both available, and DAP quotations show the landed cost up front. Documentation such as certificate of origin or material certificates can accompany the shipment on request.
Frequently Asked Questions
Can I replace one liner only?
It is possible on a single damaged cylinder, but the bore condition of the remaining liners has to be measured first. Mixing one new liner with worn bores changes the load balance, so most overhauls are done as a full set.
Is the liner supplied with seals?
Tell us the engine serial number and we quote the liner together with the liner seal kit, O-rings and shims listed for that build, so the cylinder goes back together with the correct sealing hardware.
Is 5550111610 still available?
Send the number and your engine serial number. We check current factory parts information and confirm either availability or the superseding number before you order.