5550112110 Cylinder Liner for MTU 331 / 396 Series
5550112110 Cylinder Liner for MTU 331 / 396 Series
| Part No. | 5550112110 |
| Model | MTU 331 / 396 Series |
| Application | Cylinder Liner — Crankcase |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 5550112110
| Pos | Part No. | Designation | Qty | Unit | Measurement |
|---|---|---|---|---|---|
| 01 | 007603045101 | SEALING RING | 1 | EA | A 45 X 52 |
| 02 | 000908045003 | PLUG | 1 | EA | M 45 X 1.5 |
| 03 | 007603056100 | SEALING RING | 1 | EA | A 56 X 64 |
| 04 | 000908056000 | PLUG | 1 | EA | M 56 X 2 |
| 05 | 0000110032 | COVER | 16 | EA | |
| 06 | 5500110132 | COVER | 1 | EA | |
| 07 | 700429075002 | O-RING | 2 | EA | 75 X 3.5 |
| 08 | 000125008427 | WASHER | 4 | EA | A 8.4 |
| 09 | 000933008115 | SCREW | 4 | EA | M 8 X 25 |
| 10 | 5550101251 | OIL SPRAY NOZZLE | 8 | EA | |
| 11 | 000137008203 | SPRING WASHER | 16 | EA | B 8 |
| 12 | 000933008242 | SCREW | 16 | EA | M 8 X 65 |
| 13 | 5550111610 | CYLINDER LINER | 16 | EA | |
| 13A | 5550111710 | CYLINDER LINER | 1 | EA | |
| 13B | 5550111810 | CYLINDER LINER | 1 | EA | |
| 13C | 5550111910 | CYLINDER LINER | 1 | EA | |
| 13D | 5550112010 | CYLINDER LINER | 1 | EA | |
| 13E | 5550112110 | CYLINDER LINER | 1 | EA | |
| 14 | 5500110559 | O-RING | 16 | EA | |
| 15 | 5550110059 | SEALING RING | 16 | EA | |
| 16 | 5500110659 | SEALING RING | 16 | EA | |
| 17 | 5550110159 | SEALING RING | 16 | EA |
The 5550112110 Cylinder Liner is the cylinder liner listed for the MTU Series 331 / 396 engine. This page covers what the part does, where it sits in the crankcase, how to confirm the number against your own engine, and how we supply it. We also hold the seals, gaskets and fasteners normally renewed at the same time, so one enquiry can cover the whole job.
In the factory parts list for this engine the number is listed at position 13E of drawing E010054a0, with a quantity of 1 per assembly.
What the Cylinder Liner Does on the MTU 331 / 396
The cylinder liner forms the working bore of the cylinder. The piston rings run directly against its honed surface, so the liner has to hold a true round bore, carry heat from the piston into the cooling jacket and resist the side loads of the connecting rod. On a wet liner design it also seals combustion gas and coolant apart at the top and bottom seats.
Liners are replaced when the bore is worn past the plating or honing limits, when there is scoring or scuffing from a piston seizure, or when pitting and cavitation erosion appear on the water side. Typical symptoms are rising lube oil consumption, blue smoke, crankcase pressure, poor compression on one cylinder and coolant contamination of the oil.
Where 5550112110 Sits in the Engine
On the engine this component is part of the Crankcase, published on drawing E010054a0. Ratings within the series differ in turbocharging, injection equipment and cooling layout, so confirm the position against your engine rather than against the model name alone.
The drawings for this number list it for 12V331TB82, 12V331TC82, 12V331TC92, 12V396TB14, 12V396TB34, 12V396TB34D, 12V396TB34R, 12V396TB82, 12V396TB93, 12V396TB94.
Parts Normally Renewed With 5550112110
A liner is never changed on its own. The piston, rings, liner seals and the head gasket on that cylinder are renewed at the same time, otherwise the new bore is contaminated by the old rings and the joint has to be opened again.
- 007603045101 — SEALING RING
- 000908045003 — PLUG
- 007603056100 — SEALING RING
- 000908056000 — PLUG
- 0000110032 — COVER
- 5500110132 — COVER
Confirming 5550112110 Fits Your Engine
Work through these checks before you commit to the order:
- That 5550112110 appears in the parts list for your exact engine serial number
- That the designation on the engine data plate matches this cylinder liner
- Whether a later revision has superseded the number fitted to your engine
- The quantity required — the table above lists the factory quantity for this assembly
Supply, Lead Time and Documentation
Quotations are issued within 24 hours on working days. Stock items are dispatched from our warehouse; anything on backorder is confirmed with an expected date before you commit. We ship worldwide by air and sea and can quote on DAP terms so the landed cost is clear before you order. Tell us if you need a certificate of origin, a mill certificate or a traceability document with the shipment.
Frequently Asked Questions
Can I replace one liner only?
It is possible on a single damaged cylinder, but the bore condition of the remaining liners has to be measured first. Mixing one new liner with worn bores changes the load balance, so most overhauls are done as a full set.
Is the liner supplied with seals?
Tell us the engine serial number and we quote the liner together with the liner seal kit, O-rings and shims listed for that build, so the cylinder goes back together with the correct sealing hardware.
Is 5550112110 still available?
Send the number and your engine serial number. We check current factory parts information and confirm either availability or the superseding number before you order.