Home / Products / 5502000129 Injector for MTU 396 Series

5502000129 Injector for MTU 396 Series

5502000129 Injector for MTU 396 Series

Part No. 5502000129 · Model: MTU 396 Series
Genuine Original Worldwide Shipping
Part No.5502000129
ModelMTU 396 Series
ApplicationFuel Injector — Coolant circuit
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5502000129

Pos Part No. Designation Qty Unit Measurement
01 5552001215 ANNULAR-SLIDE THERMOSTAT 1 EA
02 5379970216 THREADED BUSHING 2 EA
03 5509971016 THREADED BUSHING 2 EA
04 007603022102 SEALING RING 2 EA A 22 X 27
05 000908022001 PLUG 2 EA M 22 X 1.5
06 007603018101 SEALING RING 3 EA A 18 X 22
07 000908018002 PLUG 3 EA M 18 X 1.5
08 0009970436 DRAIN VALVE 1 EA
09 5502003316 COOLANT OUTLET HOUSING 1 EA
10 5502032980 GASKET 1 EA
11 5502036039 FLANGE 1 EA
12 000933008117 SCREW 3 EA M 8 X 30
13 000137008203 SPRING WASHER 3 EA B 8
14 700429185001 O-RING 1 EA 185 X 3
15 000137008203 SPRING WASHER 6 EA B 8
16 000931008152 SCREW 3 EA M 8 X 140
17 000931008144 SCREW 1 EA M 8 X 120
18 000931008158 SCREW 2 EA M 8 X 160
19 5552030477 SUPPORT 1 EA
20 5552030677 SUPPORT 1 EA
21 000137010202 SPRING WASHER 10 EA B 10
22 000931010231 SCREW 4 EA M 10 X 45
23 000931010236 SCREW 4 EA M 10 X 70
24 000931010212 SCREW 2 EA M 10 X 60
33 5502000129 INJECTOR 1 EA

The 5502000129 Injector is the fuel injector listed for the MTU Series 396 engine. This page covers what the part does, where it sits in the coolant circuit, how to confirm the number against your own engine, and how we supply it. We also hold the seals, gaskets and fasteners normally renewed at the same time, so one enquiry can cover the whole job.

In the factory parts list for this engine the number is listed at position 33 of drawing E14084701, with a quantity of 1 per assembly.

What the Injector Does on the MTU 396

The injector meters and atomises fuel into the combustion chamber at the pressure and timing set by the injection system. Spray pattern, opening pressure and the seal at the cylinder head all affect starting, smoke and fuel consumption.

Injectors are tested when the engine smokes, knocks, misfires or loses power, and are replaced or overhauled at the recommended interval. A leaking injector washes the oil film off the liner and can seize a piston, so a suspected injector is not left in service.

Where 5502000129 Sits in the Engine

In the parts catalogue this number sits in the Coolant circuit group, drawing E14084701. Because MTU built this series in several ratings and configurations, the same component can be fitted in different positions from one engine to the next. The table above lists the quantities as published for this drawing.

The drawings for this number list it for 12V396TB33, 12V396TB34, 12V396TB34D, 12V396TB34R, 12V396TC33, 12V396TC34, 12V396TC34D, 12V396TC34R, 16V396TB34, 16V396TB34D.

Parts Normally Renewed With 5502000129

An injector is fitted with a new copper sleeve or sealing washer, new O-rings and, where used, new clamp hardware. High-pressure lines that have been opened are replaced rather than reused.

  • 5552001215 — ANNULAR-SLIDE THERMOSTAT
  • 5379970216 — THREADED BUSHING
  • 5509971016 — THREADED BUSHING
  • 007603022102 — SEALING RING
  • 000908022001 — PLUG
  • 007603018101 — SEALING RING

Confirming 5502000129 Fits Your Engine

Before ordering, confirm the number against your own engine:

  • That 5502000129 appears in the parts list for your exact engine serial number
  • That the designation on the engine data plate matches this fuel injector
  • Whether a later revision has superseded the number fitted to your engine
  • The quantity required — the table above lists the factory quantity for this assembly

Supply, Lead Time and Documentation

We quote within one working day. Items in stock leave the warehouse immediately; where a part has to be sourced, we give you the expected date before you place the order. Air and sea freight are both available, and DAP quotations show the landed cost up front. Documentation such as certificate of origin or material certificates can accompany the shipment on request.

Frequently Asked Questions

Can the injector be overhauled?

On many builds the nozzle and holder can be rebuilt and re-set on a test bench. We can supply either a rebuilt unit or a new one, and quote the test certificate with it.

Do I need to code the injector to the engine?

On mechanically governed engines no coding is needed; the injector is set on a test bench. Tell us your engine type and we confirm what is required.

Is 5502000129 still available?

Send the number and your engine serial number. We check current factory parts information and confirm either availability or the superseding number before you order.

Inquire About This Part