Home / Products / 5500770062 Thrust Washer for MTU 396 Series

5500770062 Thrust Washer for MTU 396 Series

5500770062 Thrust Washer for MTU 396 Series

Part No. 5500770062 · Model: MTU 396 Series
Genuine Original Worldwide Shipping
Part No.5500770062
ModelMTU 396 Series
ApplicationMain Bearing — Injection equipment
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5500770062

Pos Part No. Designation Qty Unit Measurement
01 8379901140 WASHER 12 EA
02 000931010237 SCREW 12 EA M 10 X 90
03 5500700414 DRIVE SHAFT 1 EA
04 5500770062 THRUST WASHER 1 EA
05 0009922130 CLAMPING ELEMENT 2 EA
06 5550770150 COLLARED BUSHING 1 EA
07 700429105001 O-RING 1 EA 105 X 3.5
08 5550700217 BEARING FLANGE 1 EA
09 200625906316 GROOVED BALL BEARING 1 EA 6308 N J
10 5590700107 COVER 1 EA
11 000137010202 SPRING WASHER 4 EA B 10
12 000934010005 HEX NUT 4 EA M 10
13 5500770671 STRESS BOLT 1 EA
14 5500770650 COLLARED BUSHING 1 EA
15 700429075002 O-RING 1 EA 75 X 3.5
16 000125008427 WASHER 1 EA A 8.4
17 304017008079 SCREW 1 EA M 8 X 20
18 5590770316 COUPLING SLEEVE 1 EA
19 000472072000 SNAP RING 2 EA 72 X 2.5
20 5500770153 PLUG-IN SLEEVE 1 EA
21 700429105001 O-RING 2 EA 105 X 3.5

The 5500770062 Thrust Washer is the main bearing listed for the MTU Series 396 engine. This page covers what the part does, where it sits in the injection equipment, how to confirm the number against your own engine, and how we supply it. We also hold the seals, gaskets and fasteners normally renewed at the same time, so one enquiry can cover the whole job.

In the factory parts list for this engine the number is listed at position 04 of drawing E11019518, with a quantity of 1 per assembly.

What the Thrust Washer Does on the MTU 396

The main bearings carry the crankshaft in the crankcase and hold the oil film that the whole rotating assembly depends on. Thrust faces or separate thrust washers control crankshaft end float, which in turn sets the alignment of the gear train and the clutch or coupling.

Bearings are replaced at overhaul regardless of appearance, and earlier if oil pressure drops, if the oil analysis shows bearing material, or if end float is out of limits. Scoring, fatigue pitting and a copper-coloured showing through the overlay all mean replacement.

Where 5500770062 Sits in the Engine

On the engine this component is part of the Injection equipment, published on drawing E11019518. Ratings within the series differ in turbocharging, injection equipment and cooling layout, so confirm the position against your engine rather than against the model name alone.

The drawings for this number list it for 12V396TB14, 12V396TB34, 12V396TB34D, 12V396TB34R, 12V396TB94, 12V396TC34, 12V396TC34D, 12V396TC54, 12V396TE14, 12V396TE34.

Parts Normally Renewed With 5500770062

Main bearings are renewed with the conrod bearings, and the crankshaft journals are measured and polished at the same time. Thrust washers and the crankshaft seals are replaced while the sump is off.

  • 8379901140 — WASHER
  • 000931010237 — SCREW
  • 5500700414 — DRIVE SHAFT
  • 0009922130 — CLAMPING ELEMENT
  • 5550770150 — COLLARED BUSHING
  • 700429105001 — O-RING

Confirming 5500770062 Fits Your Engine

Work through these checks before you commit to the order:

  • That 5500770062 appears in the parts list for your exact engine serial number
  • That the designation on the engine data plate matches this main bearing
  • Whether a later revision has superseded the number fitted to your engine
  • The quantity required — the table above lists the factory quantity for this assembly

Supply, Lead Time and Documentation

Quotations are issued within 24 hours on working days. Stock items are dispatched from our warehouse; anything on backorder is confirmed with an expected date before you commit. We ship worldwide by air and sea and can quote on DAP terms so the landed cost is clear before you order. Tell us if you need a certificate of origin, a mill certificate or a traceability document with the shipment.

Frequently Asked Questions

Are the bearings supplied in standard and repair sizes?

Yes. Send the journal measurements or the markings on the old shells and we confirm the size listed for your engine before quoting.

Do I need to measure the crankshaft?

Always. Fitting new shells to a worn or oval journal will destroy them within hours. The journal dimensions and taper decide whether the crank can stay in the engine.

Is 5500770062 still available?

Send the number and your engine serial number. We check current factory parts information and confirm either availability or the superseding number before you order.

Inquire About This Part