5502010276 Thrust Washer for MTU 396 Series
5502010276 Thrust Washer for MTU 396 Series
| Part No. | 5502010276 |
| Model | MTU 396 Series |
| Application | Main Bearing — Water pump |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 5502010276
| Pos | Part No. | Designation | Qty | Unit | Measurement |
|---|---|---|---|---|---|
| 000 | 5592001001 | COOLANT PUMP | 1 | EA | |
| 01 | 5592000003 | HOUSING | 1 | EA | |
| 02 | 0002017519 | ROTARY SEAL | 1 | EA | |
| 03 | 0079977247 | SHAFT SEAL | 1 | EA | |
| 04 | 5552010005 | COOLANT PUMP SHAFT | 1 | EA | |
| 05 | 5552010010 | BEARING HOUSING | 1 | EA | |
| 06 | 0009813527 | ANGULAR-CONTACT BALL BEARING | 2 | EA | 72 X 35 X 17 |
| 07 | 270952035101 | TAB WASHER | 1 | EA | A 35 |
| 08 | 070852035000 | SLOTTED NUT | 1 | EA | M 35 X 1.5 |
| 09 | 900170010020 | SCREW | 4 | EA | M 10 X 55 |
| 10 | 5592010007 | IMPELLER | 1 | EA | |
| 11 | 700429046000 | O-RING | 1 | EA | 46 X 3 |
| 12 | 0002010418 | COUNTERRING | 1 | EA | |
| 13 | 5502010276 | THRUST WASHER | 1 | EA | |
| 14 | 700209012204 | STRESS BOLT | 1 | EA | B M 12 X 90 |
| 15 | 5592030236 | CONNECTING PIECE | 1 | EA | |
| 16 | 700429150001 | O-RING | 1 | EA | 150 X 5.4 |
| 17 | 000912006097 | SCREW | 1 | EA | M 6 X 16 |
This page covers 5502010276, the main bearing for the MTU Series 396 engine, as listed in the factory parts catalogue under drawing E13014106. It explains the function of the part, the wear signs that call for replacement, the components that should be renewed at the same time, and how to confirm fitment before you order.
In the factory parts list for this engine the number is listed at position 13 of drawing E13014106, with a quantity of 1 per assembly.
What the Thrust Washer Does on the MTU 396
The main bearings carry the crankshaft in the crankcase and hold the oil film that the whole rotating assembly depends on. Thrust faces or separate thrust washers control crankshaft end float, which in turn sets the alignment of the gear train and the clutch or coupling.
Bearings are replaced at overhaul regardless of appearance, and earlier if oil pressure drops, if the oil analysis shows bearing material, or if end float is out of limits. Scoring, fatigue pitting and a copper-coloured showing through the overlay all mean replacement.
Where 5502010276 Sits in the Engine
On the engine this component is part of the Water pump, published on drawing E13014106. Ratings within the series differ in turbocharging, injection equipment and cooling layout, so confirm the position against your engine rather than against the model name alone.
The drawings for this number list it for 12V396TB14, 12V396TB34, 12V396TB34D, 12V396TB34R, 12V396TB94, 12V396TC14, 12V396TC34, 12V396TC34D, 12V396TC54, 12V396TE14.
Parts Normally Renewed With 5502010276
Main bearings are renewed with the conrod bearings, and the crankshaft journals are measured and polished at the same time. Thrust washers and the crankshaft seals are replaced while the sump is off.
- 5592001001 — COOLANT PUMP
- 5592000003 — HOUSING
- 0002017519 — ROTARY SEAL
- 0079977247 — SHAFT SEAL
- 5552010005 — COOLANT PUMP SHAFT
- 5552010010 — BEARING HOUSING
Confirming 5502010276 Fits Your Engine
The number on the engine is the only reliable reference. Confirm the following:
- That 5502010276 appears in the parts list for your exact engine serial number
- That the designation on the engine data plate matches this main bearing
- Whether a later revision has superseded the number fitted to your engine
- The quantity required — the table above lists the factory quantity for this assembly
Supply, Lead Time and Documentation
Send the enquiry with your engine number and the quantity required and we will come back within 24 hours on working days with price and availability. Stock is dispatched from our warehouse, backorders are confirmed with a date, and we ship worldwide by air or sea. Certificates and traceability documents are available if your inspection or classification society requires them.
Frequently Asked Questions
Are the bearings supplied in standard and repair sizes?
Yes. Send the journal measurements or the markings on the old shells and we confirm the size listed for your engine before quoting.
Do I need to measure the crankshaft?
Always. Fitting new shells to a worn or oval journal will destroy them within hours. The journal dimensions and taper decide whether the crank can stay in the engine.
Is 5502010276 still available?
Send the number and your engine serial number. We check current factory parts information and confirm either availability or the superseding number before you order.