5502000129 Injector for MTU 396 Series
5502000129 Injector for MTU 396 Series
| Part No. | 5502000129 |
| Model | MTU 396 Series |
| Application | Fuel Injector — Coolant circuit |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 5502000129
| Pos | Part No. | Designation | Qty | Unit | Measurement |
|---|---|---|---|---|---|
| 01 | 5552001215 | ANNULAR-SLIDE THERMOSTAT | 1 | EA | |
| 02 | 5379970216 | THREADED BUSHING | 2 | EA | |
| 03 | 5509971016 | THREADED BUSHING | 2 | EA | |
| 04 | 007603022102 | SEALING RING | 2 | EA | A 22 X 27 |
| 05 | 000908022001 | PLUG | 2 | EA | M 22 X 1.5 |
| 06 | 007603018101 | SEALING RING | 3 | EA | A 18 X 22 |
| 07 | 000908018002 | PLUG | 3 | EA | M 18 X 1.5 |
| 08 | 0009970436 | DRAIN VALVE | 1 | EA | |
| 09 | 5502003316 | COOLANT OUTLET HOUSING | 1 | EA | |
| 10 | 5502032980 | GASKET | 1 | EA | |
| 11 | 5502036039 | FLANGE | 1 | EA | |
| 12 | 000933008117 | SCREW | 3 | EA | M 8 X 30 |
| 13 | 000137008203 | SPRING WASHER | 3 | EA | B 8 |
| 14 | 700429185001 | O-RING | 1 | EA | 185 X 3 |
| 15 | 000137008203 | SPRING WASHER | 6 | EA | B 8 |
| 16 | 000931008152 | SCREW | 3 | EA | M 8 X 140 |
| 17 | 000931008144 | SCREW | 1 | EA | M 8 X 120 |
| 18 | 000931008158 | SCREW | 2 | EA | M 8 X 160 |
| 19 | 5552030477 | SUPPORT | 1 | EA | |
| 20 | 5552030677 | SUPPORT | 1 | EA | |
| 21 | 000137010202 | SPRING WASHER | 10 | EA | B 10 |
| 22 | 000931010231 | SCREW | 4 | EA | M 10 X 45 |
| 23 | 000931010236 | SCREW | 4 | EA | M 10 X 70 |
| 24 | 000931010212 | SCREW | 2 | EA | M 10 X 60 |
| 33 | 5502000129 | INJECTOR | 1 | EA |
The 5502000129 Injector is the fuel injector listed for the MTU Series 396 engine. This page covers what the part does, where it sits in the coolant circuit, how to confirm the number against your own engine, and how we supply it. We also hold the seals, gaskets and fasteners normally renewed at the same time, so one enquiry can cover the whole job.
In the factory parts list for this engine the number is listed at position 33 of drawing E14084701, with a quantity of 1 per assembly.
What the Injector Does on the MTU 396
The injector meters and atomises fuel into the combustion chamber at the pressure and timing set by the injection system. Spray pattern, opening pressure and the seal at the cylinder head all affect starting, smoke and fuel consumption.
Injectors are tested when the engine smokes, knocks, misfires or loses power, and are replaced or overhauled at the recommended interval. A leaking injector washes the oil film off the liner and can seize a piston, so a suspected injector is not left in service.
Where 5502000129 Sits in the Engine
In the parts catalogue this number sits in the Coolant circuit group, drawing E14084701. Because MTU built this series in several ratings and configurations, the same component can be fitted in different positions from one engine to the next. The table above lists the quantities as published for this drawing.
The drawings for this number list it for 12V396TB33, 12V396TB34, 12V396TB34D, 12V396TB34R, 12V396TC33, 12V396TC34, 12V396TC34D, 12V396TC34R, 16V396TB34, 16V396TB34D.
Parts Normally Renewed With 5502000129
An injector is fitted with a new copper sleeve or sealing washer, new O-rings and, where used, new clamp hardware. High-pressure lines that have been opened are replaced rather than reused.
- 5552001215 — ANNULAR-SLIDE THERMOSTAT
- 5379970216 — THREADED BUSHING
- 5509971016 — THREADED BUSHING
- 007603022102 — SEALING RING
- 000908022001 — PLUG
- 007603018101 — SEALING RING
Confirming 5502000129 Fits Your Engine
Before ordering, confirm the number against your own engine:
- That 5502000129 appears in the parts list for your exact engine serial number
- That the designation on the engine data plate matches this fuel injector
- Whether a later revision has superseded the number fitted to your engine
- The quantity required — the table above lists the factory quantity for this assembly
Supply, Lead Time and Documentation
We quote within one working day. Items in stock leave the warehouse immediately; where a part has to be sourced, we give you the expected date before you place the order. Air and sea freight are both available, and DAP quotations show the landed cost up front. Documentation such as certificate of origin or material certificates can accompany the shipment on request.
Frequently Asked Questions
Can the injector be overhauled?
On many builds the nozzle and holder can be rebuilt and re-set on a test bench. We can supply either a rebuilt unit or a new one, and quote the test certificate with it.
Do I need to code the injector to the engine?
On mechanically governed engines no coding is needed; the injector is set on a test bench. Tell us your engine type and we confirm what is required.
Is 5502000129 still available?
Send the number and your engine serial number. We check current factory parts information and confirm either availability or the superseding number before you order.