Home / Products / 5410500436 Bearing Pedestal for MTU 2000 – Exploded View & Parts List

5410500436 Bearing Pedestal for MTU 2000 – Exploded View & Parts List

5410500436 Bearing Pedestal for MTU 2000 – Exploded View & Parts List

Part No. 5410500436 · Model: MTU 2000
Genuine Original Worldwide Shipping
Part No.5410500436
ModelMTU 2000
ApplicationControl System assembly (drawing E0555391a0)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5410500436

MTU 2000 control system exploded view, drawing E0555391a0
C/N Part Number Description Qty U/M Dimension
1 5410500436 BEARING PEDESTAL 1 EA
2 5410500534 ROCKER ARM 1 EA
3 5410500433 ROCKER ARM 1 EA
4 5410550420 ADJUSTING SCREW 2 EA
5 4229900051 NUT 2 EA
6 0019908240 WASHER 2 EA
7 000471024000 SNAP RING 2 EA 24 X 1.2
8 910105010004 SCREW 2 EA M10 X 90
Drawing E0555391a0 · 8 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 2000 series.

The exploded view below is drawing E0555391a0 from the MTU 2000 series parts catalog, covering the control system assembly. The accompanying table lists all 8 positions on that drawing — part number, description, quantity, unit of measure and dimension — in the same order as the position numbers on the drawing.

Reading Drawing E0555391a0

The drawing is a service illustration, not a photograph: parts are separated along the assembly axis and numbered in the order they are fitted. Read a position number from the drawing, find the same number in the C/N column, and the row gives you the part number to order.

The control system group covers bearing pedestal, rocker arm, adjusting screw and nut among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 9 engine variants:

12V 2000 G6012V 2000 M9012V 2000 M90/7012V 2000 N9016V 2000 M6016V 2000 M9016V 2000 M90/7016V 2000 TE908V 2000 M60

The illustration is typical for the control system group and is used across 9 engine variants, so the same position may carry a different part number on an early or late build. The quantity column reflects the variant catalog reproduced here; if your engine plate shows a different rating or serial range, send it and we will confirm the correct number before shipping.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E0555391a0?

Yes. All 8 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Service Notes

This drawing carries bearing pedestal, rocker arm, adjusting screw, nut and washer, among other positions. A cylinder head overhaul normally replaces the valve springs, valve seats and stem seals as a set, together with the head gasket and the head bolts, which are torque-to-yield and not reused. Guides and seat rings are renewed when the wear limit is reached.

Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.

Other Drawings in This Group

The same control system group is covered by further drawings in the MTU 2000 / 4000 series catalog:

Inquire About This Part