Home / Products / 5311800120 Crankcase and Attachments for MTU 2000 – Parts List

5311800120 Crankcase and Attachments for MTU 2000 – Parts List

5311800120 Crankcase and Attachments for MTU 2000 – Parts List

Part No. 5311800120 · Model: MTU 2000
Genuine Original Worldwide Shipping
Part No.5311800120
ModelMTU 2000
ApplicationCrankcase and Attachments assembly (drawing E0183008b2)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5311800120

MTU 2000 crankcase and attachments exploded view, drawing E0183008b2
C/N Part Number Description Qty U/M Dimension
1 0000183735 OIL SEPARATOR 2 EA
2 5311800020 PIPE 1 EA
3 700223013000 BANJO SCREW 1 EA A 15
4 007603022102 SEALING RING 1 EA A 22 X 27
5 5311800120 PIPE 1 EA
6 915007020000 REDUCTION UNION 1 EA 20 / 13
7 007603022102 SEALING RING 1 EA A 22 X 27
8 5360100176 FLANGE 1 EA
9 5590180580 GASKET 1 EA
10 000933010035 SCREW 2 EA M 10 X 25
11 000125010524 WASHER 2 EA A 10.5
12 0009959301 PIPE CLAMP 3 EA
13 3909970682 INTAKE HOSE 1 MR IN-DM 25
14 3909970682 INTAKE HOSE 1 MR IN-DM 25
15 3909970682 INTAKE HOSE 1 MR IN-DM 25
16 3909970682 INTAKE HOSE 1 MR IN-DM 25
17 000000000667 CLAMP 8 EA 20-32 X 13-SW8-W3
18 5501871240 RETAINER 1 EA
19 304017008079 SCREW 2 EA M 8 X 20
20 000125008427 WASHER 1 EA A 8.4
21 0009959301 PIPE CLAMP 1 EA
22 000934008008 HEX NUT 1 EA M 8
23 5500780453 SPACER SLEEVE 2 EA
24 0009975348 SEALING RING 2 EA
Drawing E0183008b2 · 24 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 2000 series.

The exploded view below is drawing E0183008b2 from the MTU 2000 series parts catalog, covering the crankcase and attachments assembly. The accompanying table lists all 24 positions on that drawing — part number, description, quantity, unit of measure and dimension — in the same order as the position numbers on the drawing.

Reading Drawing E0183008b2

Position numbers on the drawing correspond one-to-one with the C/N column of the table. Where a position carries more than one piece, the quantity column gives the count for a single assembly, which is what you need when ordering a complete set of seals, bolts or washers.

The crankcase and attachments group covers oil separator, pipe, banjo screw and sealing ring among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 1 engine variants:

8V 2000 M60

Because this drawing is shared by 1 engine variants, minor differences exist between builds. The parts list above follows one catalog variant, and quantities are per single engine assembly. Send your engine serial number if you need the list checked against a specific build.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E0183008b2?

Yes. All 24 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Service Notes

This drawing carries oil separator, pipe, banjo screw, sealing ring and reduction union, among other positions. Crankcase work usually replaces the sealing rings and end-cover gaskets at the same time as the bearing shells. Bolts and studs in the main bearing area are renewed rather than reused, and sealing compound is applied to the joint faces.

Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.

Other Drawings in This Group

The same crankcase and attachments group is covered by further drawings in the MTU 2000 series catalog:

Inquire About This Part