Home / Products / 0000909050 Fuel Pump for MTU 2000 – Exploded View & Parts List

0000909050 Fuel Pump for MTU 2000 – Exploded View & Parts List

0000909050 Fuel Pump for MTU 2000 – Exploded View & Parts List

Part No. 0000909050 · Model: MTU 2000
Genuine Original Worldwide Shipping
Part No.0000909050
ModelMTU 2000
ApplicationFuel System, Low Pressure assembly (drawing E08100002a)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 0000909050

MTU 2000 fuel system, low pressure exploded view, drawing E08100002a
C/N Part Number Description Qty U/M Dimension
1 0000909050 FUEL PUMP 1 EA
2 0001321410 DRIVER 1 EA
3 910105010011 SCREW 2 EA M10 X 40
4 5412360015 DRIVE SHAFT 1 EA
5 0149976148 SEALING RING 1 EA
6 5411320005 DRIVE GEAR 1 EA
7 4039900010 SCREW 1 EA
8 5411310142 BEARING FLANGE 1 EA
Drawing E08100002a · 8 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 2000 series.

Below is drawing E08100002a of the MTU 2000 series fuel system, low pressure assembly, followed by its full parts list. All 8 positions on the drawing are listed with part number, description, quantity, unit and dimension, so a position number seen on the engine can be matched to an orderable part number.

Reading Drawing E08100002a

Position numbers on the drawing correspond one-to-one with the C/N column of the table. Where a position carries more than one piece, the quantity column gives the count for a single assembly, which is what you need when ordering a complete set of seals, bolts or washers.

The fuel system, low pressure group covers fuel pump, driver, screw and drive shaft among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 2 engine variants:

8V 2000 G208V 2000 G20-G60

Because this drawing is shared by 2 engine variants, minor differences exist between builds. The parts list above follows one catalog variant, and quantities are per single engine assembly. Send your engine serial number if you need the list checked against a specific build.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E08100002a?

Yes. All 8 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Service Notes

This drawing carries fuel pump, driver, screw, drive shaft and sealing ring, among other positions. Fuel system repairs normally renew the sealing rings and copper washers on every union that is opened, together with the fuel hoses and clamps in the same circuit. Injector seats and return-line seals are replaced whenever an injector is removed.

Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.

Other Drawings in This Group

The same fuel system, low pressure group is covered by further drawings in the MTU 2000 / 4000 series catalog:

Inquire About This Part