0000180702 Lubricating Oil System for MTU 2000 – Parts List
0000180702 Lubricating Oil System for MTU 2000 – Parts List
| Part No. | 0000180702 |
| Model | MTU 2000 |
| Application | Lubricating Oil System assembly (drawing E1823003a0) |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 0000180702

| C/N | Part Number | Description | Qty | U/M | Dimension |
|---|---|---|---|---|---|
| 1 | 5360100072 | OIL DIPSTICK | 1 | EA | |
| 2 | 5360100064 | OIL FILLER NECK | 1 | EA | |
| 3 | 0000180702 | COVER | 1 | EA | |
| 4 | 007603045101 | SEALING RING | 1 | EA | A 45 X 52 |
| 5 | 915013040000 | UNION | 1 | EA | 40 |
| 6 | 007603045101 | SEALING RING | 1 | EA | A 45 X 52 |
| 7 | 000908045003 | PLUG | 1 | EA | M 45 X 1.5 |
| 8 | 5360180140 | RETAINER | 1 | EA | |
| 9 | 5360180240 | RETAINER | 1 | EA | |
| 10 | 000125008427 | WASHER | 4 | EA | A 8.4 |
| 11 | 304017008079 | SCREW | 4 | EA | M 8 X 20 |
| 12 | 000934008008 | HEX NUT | 2 | EA | M 8 |
| 13 | 700325042100 | PIPE HALF-CLAMP | 2 | EA | 1/2 D 9-42 |
| 14 | 000933008242 | SCREW | 2 | EA | M 8 X 65 |
| 15 | 000125008427 | WASHER | 2 | EA | A 8.4 |
| 16 | 000934008008 | HEX NUT | 2 | EA | M 8 |
The exploded view below is drawing E1823003a0 from the MTU 2000 series parts catalog, covering the lubricating oil system assembly. The accompanying table lists all 16 positions on that drawing — part number, description, quantity, unit of measure and dimension — in the same order as the position numbers on the drawing.
Reading Drawing E1823003a0
The drawing is a service illustration, not a photograph: parts are separated along the assembly axis and numbered in the order they are fitted. Read a position number from the drawing, find the same number in the C/N column, and the row gives you the part number to order.
The lubricating oil system group covers oil dipstick, oil filler neck, cover and sealing ring among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.
Engines Covered
The drawing appears in the parts catalogs of 6 engine variants:
The illustration is typical for the lubricating oil system group and is used across 6 engine variants, so the same position may carry a different part number on an early or late build. The quantity column reflects the variant catalog reproduced here; if your engine plate shows a different rating or serial range, send it and we will confirm the correct number before shipping.
Ordering From This Drawing
Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.
- Quotation — within 24 hours, working days
- Minimum — single pieces accepted, quantity breaks on repeat orders
- Shipping — air for urgent items, sea freight for consolidated orders
- Documents — invoice, packing list, certificate of origin on request
Frequently Asked Questions
What does C/N mean in the parts list?
C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.
Are the quantities per engine or per set?
Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.
Can you supply every position on drawing E1823003a0?
Yes. All 16 positions in the table can be quoted, and ordering several positions together normally reduces total freight.
What if my engine has a different part number for the same position?
MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.
Service Notes
This drawing carries oil dipstick, oil filler neck, cover, sealing ring and union, among other positions. Oil system overhauls replace the pump sealing rings, suction pipe gaskets and all O-rings on the circuit. Oil lines and banjo unions are renewed when the sealing faces are marked, and the filter element is changed at the same time.
Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.
Other Drawings in This Group
The same lubricating oil system group is covered by further drawings in the MTU 2000 series catalog: