5500600130 Support for MTU 331 / 396 – Exploded View & Parts List
5500600130 Support for MTU 331 / 396 – Exploded View & Parts List
| Part No. | 5500600130 |
| Model | MTU 331 / 396 |
| Application | Engine and Gearbox Actuation assembly (drawing E870002a0) |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 5500600130

| C/N | Part Number | Description | Qty | U/M | Dimension |
|---|---|---|---|---|---|
| 1 | 000835006057 | STUD | 2 | EA | M 6 X 20 |
| 2 | 000137006205 | SPRING WASHER | 2 | EA | B 6 |
| 3 | 000835006014 | STUD | 2 | EA | M 6 X 25 |
| 4 | 5500600241 | RETAINER | 1 | EA | |
| 5 | 009021006203 | WASHER | 2 | EA | 6.4 |
| 6 | 000934006006 | HEX NUT | 4 | EA | M 6 |
| 7 | 700429010000 | O-RING | 1 | EA | 10 X 2 |
| 8 | 5500600130 | SUPPORT | 1 | EA | |
| 9 | 000933006088 | SCREW | 3 | EA | M 6 X 20 |
| 10 | 000137006205 | SPRING WASHER | 3 | EA | B 6 |
| 11 | 5500600426 | LEVER | 1 | EA | |
| 12 | 0039810525 | GROOVED BALL BEARING | 1 | EA | |
| 13 | 000984019000 | SNAP RING | 2 | EA | 19 X 1 |
| 14 | 000137006102 | SPRING WASHER | 1 | EA | A 6 |
| 15 | 200433006400 | WASHER | 2 | EA | 6.4 |
| 16 | 006799005000 | LOCKWASHER | 1 | EA | 5 |
| 17 | 5050615774 | PIN | 1 | EA | |
| 18 | 5050611576 | WASHER | 1 | EA | |
| 19 | 999900005000 | NUT | 1 | EA | M 5 |
| 20 | 5050610222 | ADJUSTING SCREW | 1 | EA | |
| 21 | 001481002008 | SPRING PIN | 1 | EA | 2 X 10-N |
| 22 | 705101000625 | GROOVED BALL BEARING | 1 | EA | |
| 23 | 006799004000 | LOCKWASHER | 1 | EA | 4 |
| 24 | 915006006002 | UNION | 1 | EA | 6 |
| 25 | 5059930010 | TENSION SPRING | 1 | EA | |
| 26 | 5500600568 | PIPE | 1 | EA | |
| 27 | 5509900563 | BANJO SCREW | 1 | EA | |
| 28 | 007603014102 | SEALING RING | 2 | EA | A 14 X 18 |
| 29 | 5500610239 | RETAINER | 1 | EA | |
| 31 | 700327008000 | GROMMET | 1 | EA | 8 |
| 32 | 304017006066 | SCREW | 1 | EA | M 6 X 35 |
| 33 | 000137006205 | SPRING WASHER | 1 | EA | B 6 |
| 34 | 000933008114 | SCREW | 1 | EA | M 8 X 22 |
| 35 | 000137008203 | SPRING WASHER | 1 | EA | B 8 |
| 36 | 5500610088 | COVER PLATE | 1 | EA | |
| 37 | 000933006086 | SCREW | 1 | EA | M 6 X 8 |
| 38 | 000137006205 | SPRING WASHER | 1 | EA | B 6 |
| 39 | 5500610012 | CONTROL LEVER | 1 | EA | |
| 40 | 5500610167 | CLAMP | 1 | EA | |
| 41 | 5510750074 | AXLE | 1 | EA | |
| 42 | 5510720050 | BEARING BUSHING | 2 | EA | |
| 43 | 001440008000 | WASHER | 1 | EA | 8 |
| 44 | 006799007000 | LOCKWASHER | 2 | EA | 7 |
| 45 | 000912006042 | SCREW | 1 | EA | M 6 X 25 |
| 46 | 007980006004 | SPRING WASHER | 1 | EA | 6 |
| 47 | 000933006194 | SCREW | 2 | EA | M 6 X 28 |
| 48 | 000988006013 | ADJUSTING WASHER | 2 | EA | 6 X 12 X 0.5 |
| 49 | 5500600526 | LEVER | 1 | EA | |
| 50 | 000912006042 | SCREW | 1 | EA | M 6 X 25 |
| 51 | 007980006004 | SPRING WASHER | 1 | EA | 6 |
| 52 | 5009930110 | TENSION SPRING | 1 | EA |
The exploded view below is drawing E870002a0 from the MTU 331 / 396 series parts catalog, covering the engine and gearbox actuation assembly. The accompanying table lists all 51 positions on that drawing — part number, description, quantity, unit of measure and dimension — in the same order as the position numbers on the drawing.
Reading Drawing E870002a0
The drawing is a service illustration, not a photograph: parts are separated along the assembly axis and numbered in the order they are fitted. Read a position number from the drawing, find the same number in the C/N column, and the row gives you the part number to order.
The engine and gearbox actuation group covers stud, spring washer, retainer and washer among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.
Engines Covered
The drawing appears in the parts catalogs of 5 engine variants:
The illustration is typical for the engine and gearbox actuation group and is used across 5 engine variants, so the same position may carry a different part number on an early or late build. The quantity column reflects the variant catalog reproduced here; if your engine plate shows a different rating or serial range, send it and we will confirm the correct number before shipping.
Ordering From This Drawing
Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.
- Quotation — within 24 hours, working days
- Minimum — single pieces accepted, quantity breaks on repeat orders
- Shipping — air for urgent items, sea freight for consolidated orders
- Documents — invoice, packing list, certificate of origin on request
Frequently Asked Questions
What does C/N mean in the parts list?
C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.
Are the quantities per engine or per set?
Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.
Can you supply every position on drawing E870002a0?
Yes. All 51 positions in the table can be quoted, and ordering several positions together normally reduces total freight.
What if my engine has a different part number for the same position?
MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.