5241800821 Oil Line for MTU 4000 – Exploded View & Parts List
5241800821 Oil Line for MTU 4000 – Exploded View & Parts List
| Part No. | 5241800821 |
| Model | MTU 4000 |
| Application | Lubricating Oil System assembly (drawing E1883002a0) |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 5241800821

| C/N | Part Number | Description | Qty | U/M | Dimension |
|---|---|---|---|---|---|
| 1 | 915013025001 | UNION | 2 | EA | 25 |
| 2 | 007603030101 | SEALING RING | 2 | EA | A 30 X 36 |
| 3 | 5241800821 | OIL LINE | 1 | EA | |
| 4 | 5241800721 | OIL LINE | 1 | EA | |
| 5 | 915005020001 | SEALING CONE | 2 | EA | 22 |
| 6 | 915001020003 | NUT | 2 | EA | 20 M 30 X 1.5 |
| 7 | 5241871040 | RETAINER | 2 | EA | |
| 8 | 700325028101 | PIPE HALF-CLAMP | 4 | EA | 1/2 D 9-28 |
| 9 | 700327022000 | GROMMET | 2 | EA | 22 |
| 10 | 304017008079 | SCREW | 4 | EA | M 8 X 20 |
| 11 | 000125008427 | WASHER | 8 | EA | A 8.4 |
| 12 | 304017008086 | SCREW | 4 | EA | M 8 X 45 |
Below is drawing E1883002a0 of the MTU 4000 series lubricating oil system assembly, followed by its full parts list. All 12 positions on the drawing are listed with part number, description, quantity, unit and dimension, so a position number seen on the engine can be matched to an orderable part number.
Reading Drawing E1883002a0
Position numbers on the drawing correspond one-to-one with the C/N column of the table. Where a position carries more than one piece, the quantity column gives the count for a single assembly, which is what you need when ordering a complete set of seals, bolts or washers.
The lubricating oil system group covers union, sealing ring, oil line and sealing cone among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.
Engines Covered
The drawing appears in the parts catalogs of 6 engine variants:
Because this drawing is shared by 6 engine variants, minor differences exist between builds. The parts list above follows one catalog variant, and quantities are per single engine assembly. Send your engine serial number if you need the list checked against a specific build.
Ordering From This Drawing
Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.
- Quotation — within 24 hours, working days
- Minimum — single pieces accepted, quantity breaks on repeat orders
- Shipping — air for urgent items, sea freight for consolidated orders
- Documents — invoice, packing list, certificate of origin on request
Frequently Asked Questions
What does C/N mean in the parts list?
C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.
Are the quantities per engine or per set?
Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.
Can you supply every position on drawing E1883002a0?
Yes. All 12 positions in the table can be quoted, and ordering several positions together normally reduces total freight.
What if my engine has a different part number for the same position?
MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.
Service Notes
This drawing carries union, sealing ring, oil line, sealing cone and nut, among other positions. Oil system overhauls replace the pump sealing rings, suction pipe gaskets and all O-rings on the circuit. Oil lines and banjo unions are renewed when the sealing faces are marked, and the filter element is changed at the same time.
Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.