Home / Products / 5240907376 Fuel Line for MTU 4000 – Exploded View & Parts List

5240907376 Fuel Line for MTU 4000 – Exploded View & Parts List

5240907376 Fuel Line for MTU 4000 – Exploded View & Parts List

Part No. 5240907376 · Model: MTU 4000
Genuine Original Worldwide Shipping
Part No.5240907376
ModelMTU 4000
ApplicationFuel System, Low Pressure assembly (drawing E0813005c2)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5240907376

MTU 4000 fuel system, low pressure exploded view, drawing E0813005c2
C/N Part Number Description Qty U/M Dimension
1 5240907376 FUEL LINE 1 EA
2 915005020001 SEALING CONE 1 EA 22
3 915001020003 NUT 1 EA 20 M 30 X 1.5
4 5260910401 FUEL DELIVERY PUMP 1 EA
5 700429083000 O-RING 1 EA 83 X 5
6 000912010065 SCREW 2 EA M 10 X 25
7 5249970072 FITTING 2 EA
8 5249970345 O-RING 2 EA
Drawing E0813005c2 · 8 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 4000 series.

Below is drawing E0813005c2 of the MTU 4000 series fuel system, low pressure assembly, followed by its full parts list. All 8 positions on the drawing are listed with part number, description, quantity, unit and dimension, so a position number seen on the engine can be matched to an orderable part number.

Reading Drawing E0813005c2

The drawing is a service illustration, not a photograph: parts are separated along the assembly axis and numbered in the order they are fitted. Read a position number from the drawing, find the same number in the C/N column, and the row gives you the part number to order.

The fuel system, low pressure group covers fuel line, sealing cone, nut and fuel delivery pump among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 7 engine variants:

12V 4000 R4012V 4000 R4116V 4000 R4016V 4000 R418V 4000 M60-M708V 4000 R408V 4000 R41

The illustration is typical for the fuel system, low pressure group and is used across 7 engine variants, so the same position may carry a different part number on an early or late build. The quantity column reflects the variant catalog reproduced here; if your engine plate shows a different rating or serial range, send it and we will confirm the correct number before shipping.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E0813005c2?

Yes. All 8 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Service Notes

This drawing carries fuel line, sealing cone, nut, fuel delivery pump and o-ring, among other positions. Fuel system repairs normally renew the sealing rings and copper washers on every union that is opened, together with the fuel hoses and clamps in the same circuit. Injector seats and return-line seals are replaced whenever an injector is removed.

Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.

Other Drawings in This Group

The same fuel system, low pressure group is covered by further drawings in the MTU 2000 / 4000 series catalog:

Inquire About This Part