Home / Products / 0010100351 Injector for MTU 4000 Series

0010100351 Injector for MTU 4000 Series

0010100351 Injector for MTU 4000 Series

Part No. 0010100351 · Model: MTU 4000 Series
Genuine Original Worldwide Shipping
Part No.0010100351
ModelMTU 4000 Series
ApplicationFuel Injector — Fuel system, high pressure
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 0010100351

Pos Part No. Designation Qty Unit Measurement
01 0010100351 INJECTOR 12 EA
01A 0000107951/71 INJECTOR 12 EA
02 5240780535 HOLD-DOWN CLAMP 24 EA
03 5249902101 SCREW 24 EA M12 X 100

This page covers 0010100351, the fuel injector for the MTU Series 4000 engine, as listed in the factory parts catalogue under drawing E0753007a1. It explains the function of the part, the wear signs that call for replacement, the components that should be renewed at the same time, and how to confirm fitment before you order.

In the factory parts list for this engine the number is listed at position 01 of drawing E0753007a1, with a quantity of 12 per assembly.

What the Injector Does on the MTU 4000

The injector meters and atomises fuel into the combustion chamber at the pressure and timing set by the injection system. Spray pattern, opening pressure and the seal at the cylinder head all affect starting, smoke and fuel consumption.

Injectors are tested when the engine smokes, knocks, misfires or loses power, and are replaced or overhauled at the recommended interval. A leaking injector washes the oil film off the liner and can seize a piston, so a suspected injector is not left in service.

Where 0010100351 Sits in the Engine

On the engine this component is part of the Fuel system, high pressure, published on drawing E0753007a1. Ratings within the series differ in turbocharging, injection equipment and cooling layout, so confirm the position against your engine rather than against the model name alone.

The drawings for this number list it for 12V4000C20, 12V4000G20-80, 12V4000G60, 12V4000M60/70, 12V4000M60/90, 12V4000R20 R10, 12V4000R40, 12V4000R41, 16V4000E20, 16V4000G20-G80.

Parts Normally Renewed With 0010100351

An injector is fitted with a new copper sleeve or sealing washer, new O-rings and, where used, new clamp hardware. High-pressure lines that have been opened are replaced rather than reused.

  • 0000107951/71 — INJECTOR
  • 5240780535 — HOLD-DOWN CLAMP
  • 5249902101 — SCREW

Confirming 0010100351 Fits Your Engine

Work through these checks before you commit to the order:

  • That 0010100351 appears in the parts list for your exact engine serial number
  • That the designation on the engine data plate matches this fuel injector
  • Whether a later revision has superseded the number fitted to your engine
  • The quantity required — the table above lists the factory quantity for this assembly

Supply, Lead Time and Documentation

Quotations are issued within 24 hours on working days. Stock items are dispatched from our warehouse; anything on backorder is confirmed with an expected date before you commit. We ship worldwide by air and sea and can quote on DAP terms so the landed cost is clear before you order. Tell us if you need a certificate of origin, a mill certificate or a traceability document with the shipment.

Frequently Asked Questions

Can the injector be overhauled?

On many builds the nozzle and holder can be rebuilt and re-set on a test bench. We can supply either a rebuilt unit or a new one, and quote the test certificate with it.

Do I need to code the injector to the engine?

On mechanically governed engines no coding is needed; the injector is set on a test bench. Tell us your engine type and we confirm what is required.

Is 0010100351 still available?

Send the number and your engine serial number. We check current factory parts information and confirm either availability or the superseding number before you order.

Inquire About This Part