4442360245 Intermediate Flange for MTU 2000 – Exploded View & Parts List
4442360245 Intermediate Flange for MTU 2000 – Exploded View & Parts List
| Part No. | 4442360245 |
| Model | MTU 2000 |
| Application | Gear Train, Belt Drive assembly (drawing E02700003a) |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 4442360245

| C/N | Part Number | Description | Qty | U/M | Dimension |
|---|---|---|---|---|---|
| 1 | 4242360066 | SHAFT COUPLING | 1 | EA | |
| 2 | 000472047000 | SNAP RING | 1 | EA | 47 X 1.75 |
| 3 | 5362360216 | DRIVER | 1 | EA | |
| 4 | 000472024000 | SNAP RING | 1 | EA | 24 X 1.2 |
| 5 | 000912008055 | SCREW | 5 | EA | M 8 X 25 |
| 6 | 4442360245 | INTERMEDIATE FLANGE | 1 | EA | |
| 7 | 700429075000 | O-RING | 1 | EA | 75 X 2.75 |
| 8 | 000933012050 | SCREW | 2 | EA | M 12 X 55 |
| 9 | 000125013012 | WASHER | 2 | EA | A 13 |
| 10 | 700429098000 | O-RING | 1 | EA | 98 X 3 |
Below is drawing E02700003a of the MTU 2000 series gear train, belt drive assembly, followed by its full parts list. All 10 positions on the drawing are listed with part number, description, quantity, unit and dimension, so a position number seen on the engine can be matched to an orderable part number.
Reading Drawing E02700003a
Position numbers on the drawing correspond one-to-one with the C/N column of the table. Where a position carries more than one piece, the quantity column gives the count for a single assembly, which is what you need when ordering a complete set of seals, bolts or washers.
The gear train, belt drive group covers shaft coupling, snap ring, driver and screw among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.
Engines Covered
The drawing appears in the parts catalogs of 7 engine variants:
Because this drawing is shared by 7 engine variants, minor differences exist between builds. The parts list above follows one catalog variant, and quantities are per single engine assembly. Send your engine serial number if you need the list checked against a specific build.
Ordering From This Drawing
Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.
- Quotation — within 24 hours, working days
- Minimum — single pieces accepted, quantity breaks on repeat orders
- Shipping — air for urgent items, sea freight for consolidated orders
- Documents — invoice, packing list, certificate of origin on request
Frequently Asked Questions
What does C/N mean in the parts list?
C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.
Are the quantities per engine or per set?
Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.
Can you supply every position on drawing E02700003a?
Yes. All 10 positions in the table can be quoted, and ordering several positions together normally reduces total freight.
What if my engine has a different part number for the same position?
MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.
Service Notes
This drawing carries shaft coupling, snap ring, driver, screw and intermediate flange, among other positions. Crankcase work usually replaces the sealing rings and end-cover gaskets at the same time as the bearing shells. Bolts and studs in the main bearing area are renewed rather than reused, and sealing compound is applied to the joint faces.
Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.
Other Drawings in This Group
The same gear train, belt drive group is covered by further drawings in the MTU 2000 series catalog: