Home / Products / 5511530740 Retainer for MTU 331 / 396 – Exploded View & Parts List

5511530740 Retainer for MTU 331 / 396 – Exploded View & Parts List

5511530740 Retainer for MTU 331 / 396 – Exploded View & Parts List

Part No. 5511530740 · Model: MTU 331 / 396
Genuine Original Worldwide Shipping
Part No.5511530740
ModelMTU 331 / 396
ApplicationMonitoring Equipment assembly (drawing E84044812)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5511530740

MTU 331 / 396 monitoring equipment exploded view, drawing E84044812
C/N Part Number Description Qty U/M Dimension
1 916016006201 CLAMP 1 EA BRSGU 6/15
2 916016024201 CLAMP 1 EA BRSGU 24/20
3 916016016201 CLAMP 3 EA BRSGU 16/20
4 916016014201 CLAMP 1 EA BRSGU 14/20
5 916016010203 CLAMP 4 EA BRSGU 10/20
6 916016006202 CLAMP 1 EA BRSGU 6/20
7 5512030150 SPACER BUSHING 1 EA
8 5511530050 SPACER BUSHING 3 EA
9 5502034540 RETAINER 1 EA
10 5502034640 RETAINER 1 EA
11 5511530740 RETAINER 1 EA
12 000933008214 SCREW 4 EA M 8 X 16
13 000933008117 SCREW 1 EA M 8 X 30
14 000933008170 SCREW 1 EA M 8 X 50
15 000933008098 SCREW 2 EA M 8 X 55
16 916016026202 CLAMP 1 EA BRSGU 26/20
17 000933008165 SCREW 1 EA M 8 X 70
18 000933012058 SCREW 1 EA M 12 X 20
19 000137008203 SPRING WASHER 3 EA B 8
20 000137012202 SPRING WASHER 1 EA B 12
21 000934008008 HEX NUT 2 EA M 8
22 000933006090 SCREW 1 EA M 6 X 30
23 000933006016 SCREW 1 EA M 6 X 12
24 000137006205 SPRING WASHER 1 EA B 6
25 000934006006 HEX NUT 1 EA M 6
26 5500780741 RETAINER 4 EA
27 5511530984 CABLE CONDUIT 1 EA
28 916016028200 CLAMP 1 EA BRSGU 28/20
29 916016028203 CLAMP 1 EA BRSGU 28/25
30 000933008214 SCREW 1 EA M 8 X 16
31 000933010089 SCREW 1 EA M 10 X 20
32 000137008203 SPRING WASHER 1 EA B 8
33 000137010202 SPRING WASHER 1 EA B 10
34 0001530785 CABLE 1 MR
35 700500001130 PIN TERMINAL 24 EA 1 MM2 TYP PIDG
36 0011592739 SHRINK SLEEVE 28 EA
39 700461203001 MARKER SLEEVE 12 EA 3/1
40 700461203002 MARKER SLEEVE 4 EA 3/2
41 700461203003 MARKER SLEEVE 4 EA 3/3
42 700461203004 MARKER SLEEVE 2 EA 3/4
43 700461203005 MARKER SLEEVE 2 EA 3/5
44 700461203006 MARKER SLEEVE 2 EA 3/6
45 700461203007 MARKER SLEEVE 2 EA 3/7
46 700461203008 MARKER SLEEVE 2 EA 3/8
47 700461203000 MARKER SLEEVE 2 EA 3/0
48 089345002000 INSERT 2 EA A 2
49 089280018600 THREADED BUSHING 2 EA 6 M 18 X 1.5
50 5901751641 RETAINER 1 EA
52 089345002000 INSERT 1 EA A 2
53 089349008000 SEALING RING 1 EA 8
54 089347009000 WASHER 1 EA 9
55 089280018600 THREADED BUSHING 1 EA 6 M 18 X 1.5
Drawing E84044812 · 52 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 331 / 396 series.

Below is drawing E84044812 of the MTU 331 / 396 series monitoring equipment assembly, followed by its full parts list. All 52 positions on the drawing are listed with part number, description, quantity, unit and dimension, so a position number seen on the engine can be matched to an orderable part number.

Reading Drawing E84044812

Position numbers on the drawing correspond one-to-one with the C/N column of the table. Where a position carries more than one piece, the quantity column gives the count for a single assembly, which is what you need when ordering a complete set of seals, bolts or washers.

The monitoring equipment group covers clamp, spacer bushing, retainer and screw among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 5 engine variants:

8V 331 TC928V 396 TB538V 396 TB638V 396 TB838V 396 TC34

Because this drawing is shared by 5 engine variants, minor differences exist between builds. The parts list above follows one catalog variant, and quantities are per single engine assembly. Send your engine serial number if you need the list checked against a specific build.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E84044812?

Yes. All 52 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Inquire About This Part