Home / Products / 5240372425 Piston Crown for MTU 4000 – Exploded View & Parts List

5240372425 Piston Crown for MTU 4000 – Exploded View & Parts List

5240372425 Piston Crown for MTU 4000 – Exploded View & Parts List

Part No. 5240372425 · Model: MTU 4000
Genuine Original Worldwide Shipping
Part No.5240372425
ModelMTU 4000
ApplicationPower Train assembly (drawing E0375497a1)
Genuine Verified 24h Quotation 120+ Countries

Need Help? Contact Us

✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working days

Product Description — Part No. 5240372425

MTU 4000 power train exploded view, drawing E0375497a1
C/N Part Number Description Qty U/M Dimension
1 5240300215 PISTON SKIRT 1 EA
2 5240372425 PISTON CROWN 1 EA
3 5240370276 WASHER 2 EA
4 5249900619 STRESS BOLT 4 EA
5 001481005017 SPRING PIN 1 EA 5 X 16-N
6 000472068000 SNAP RING 2 EA 68 X 2.5
7 5240370120 PISTON PIN 1 EA
8 0120370618 OIL CONTROL RING 1 EA
9 0080377019 RECTANGULAR-SECTION RING 1 EA
10 0080375819 RECTANGULAR-SECTION RING 1 EA
Drawing E0375497a1 · 10 positions listed. Positions, part numbers, quantities and dimensions are reproduced from the MTU spare parts catalog for the MTU 4000 series.

Below is drawing E0375497a1 of the MTU 4000 series power train assembly, followed by its full parts list. All 10 positions on the drawing are listed with part number, description, quantity, unit and dimension, so a position number seen on the engine can be matched to an orderable part number.

Reading Drawing E0375497a1

Position numbers on the drawing correspond one-to-one with the C/N column of the table. Where a position carries more than one piece, the quantity column gives the count for a single assembly, which is what you need when ordering a complete set of seals, bolts or washers.

The power train group covers piston skirt, piston crown, washer and stress bolt among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.

Engines Covered

The drawing appears in the parts catalogs of 12 engine variants:

12V 4000 C2012V 4000 G20-8012V 4000 G6012V 4000 M60/7012V 4000 M60/9016V 4000 E2016V 4000 G20-G8016V 4000 M60-9016V 4000 M7016V 4000 R4016V 4000 R418V 4000 G60/80

Because this drawing is shared by 12 engine variants, minor differences exist between builds. The parts list above follows one catalog variant, and quantities are per single engine assembly. Send your engine serial number if you need the list checked against a specific build.

Ordering From This Drawing

Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.

  • Quotation — within 24 hours, working days
  • Minimum — single pieces accepted, quantity breaks on repeat orders
  • Shipping — air for urgent items, sea freight for consolidated orders
  • Documents — invoice, packing list, certificate of origin on request

Frequently Asked Questions

What does C/N mean in the parts list?

C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.

Are the quantities per engine or per set?

Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.

Can you supply every position on drawing E0375497a1?

Yes. All 10 positions in the table can be quoted, and ordering several positions together normally reduces total freight.

What if my engine has a different part number for the same position?

MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.

Service Notes

This drawing carries piston skirt, piston crown, washer, stress bolt and spring pin, among other positions. Crankcase work usually replaces the sealing rings and end-cover gaskets at the same time as the bearing shells. Bolts and studs in the main bearing area are renewed rather than reused, and sealing compound is applied to the joint faces.

Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.

Other Drawings in This Group

The same power train group is covered by further drawings in the MTU 4000 series catalog:

Inquire About This Part