5410500836 Bearing Pedestal for MTU 2000 – Exploded View & Parts List
5410500836 Bearing Pedestal for MTU 2000 – Exploded View & Parts List
| Part No. | 5410500836 |
| Model | MTU 2000 |
| Application | Control System assembly (drawing E0555391b1) |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 5410500836

| C/N | Part Number | Description | Qty | U/M | Dimension |
|---|---|---|---|---|---|
| 1 | 5410500836 | BEARING PEDESTAL | 1 | EA | |
| 2 | 5410500534 | ROCKER ARM | 1 | EA | |
| 3 | 5410500633 | ROCKER ARM | 1 | EA | |
| 4 | 5410550420 | ADJUSTING SCREW | 2 | EA | |
| 5 | 4229900051 | NUT | 2 | EA | |
| 6 | 0019908240 | WASHER | 2 | EA | |
| 7 | 000471024000 | SNAP RING | 2 | EA | 24 X 1.2 |
| 8 | 5419900304 | SCREW | 2 | EA |
The exploded view below is drawing E0555391b1 from the MTU 2000 series parts catalog, covering the control system assembly. The accompanying table lists all 8 positions on that drawing — part number, description, quantity, unit of measure and dimension — in the same order as the position numbers on the drawing.
Reading Drawing E0555391b1
Position numbers on the drawing correspond one-to-one with the C/N column of the table. Where a position carries more than one piece, the quantity column gives the count for a single assembly, which is what you need when ordering a complete set of seals, bolts or washers.
The control system group covers bearing pedestal, rocker arm, adjusting screw and nut among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.
Engines Covered
The drawing appears in the parts catalogs of 19 engine variants:
…plus 1 further build variants listed in the catalog.
Because this drawing is shared by 19 engine variants, minor differences exist between builds. The parts list above follows one catalog variant, and quantities are per single engine assembly. Send your engine serial number if you need the list checked against a specific build.
Ordering From This Drawing
Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.
- Quotation — within 24 hours, working days
- Minimum — single pieces accepted, quantity breaks on repeat orders
- Shipping — air for urgent items, sea freight for consolidated orders
- Documents — invoice, packing list, certificate of origin on request
Frequently Asked Questions
What does C/N mean in the parts list?
C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.
Are the quantities per engine or per set?
Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.
Can you supply every position on drawing E0555391b1?
Yes. All 8 positions in the table can be quoted, and ordering several positions together normally reduces total freight.
What if my engine has a different part number for the same position?
MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.
Service Notes
This drawing carries bearing pedestal, rocker arm, adjusting screw, nut and washer, among other positions. A cylinder head overhaul normally replaces the valve springs, valve seats and stem seals as a set, together with the head gasket and the head bolts, which are torque-to-yield and not reused. Guides and seat rings are renewed when the wear limit is reached.
Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.
Other Drawings in This Group
The same control system group is covered by further drawings in the MTU 2000 / 4000 series catalog: