5361500066 Protective Cover for MTU 2000 – Exploded View & Parts List
5361500066 Protective Cover for MTU 2000 – Exploded View & Parts List
| Part No. | 5361500066 |
| Model | MTU 2000 |
| Application | Gear Train, Belt Drive assembly (drawing E0283007a0) |
Need Help? Contact Us
✉ [email protected] 💬 WhatsApp: +86 185 7493 8126 Reply within 24 hours on working daysProduct Description — Part No. 5361500066

| C/N | Part Number | Description | Qty | U/M | Dimension |
|---|---|---|---|---|---|
| 1 | 5361500066 | PROTECTIVE COVER | 1 | EA | |
| 2 | 5361540145 | RETAINER | 1 | EA | |
| 3 | 5361540645 | RETAINER | 1 | EA | |
| 4 | 000931010158 | SCREW | 2 | EA | M 10 X 115 |
| 5 | 000933010116 | SCREW | 2 | EA | M 10 X 45 |
| 6 | 304017008079 | SCREW | 4 | EA | M 8 X 20 |
| 7 | 000125008427 | WASHER | 4 | EA | A 8.4 |
| 8 | 000934008008 | HEX NUT | 4 | EA | M 8 |
This drawing shows the gear train, belt drive assembly of the MTU 2000 series engine, exploded so that every position is visible at once. The table below it is the complete parts list for the drawing: 8 positions with the part number, description, quantity, unit of measure and dimension for each.
Reading Drawing E0283007a0
The drawing is a service illustration, not a photograph: parts are separated along the assembly axis and numbered in the order they are fitted. Read a position number from the drawing, find the same number in the C/N column, and the row gives you the part number to order.
The gear train, belt drive group covers protective cover, retainer, screw and washer among other positions. Every one of
them is listed in the table above, so a single inquiry can cover a complete repair rather than
one item at a time.
Engines Covered
The drawing appears in the parts catalogs of 9 engine variants:
The illustration is typical for the gear train, belt drive group and is used across 9 engine variants, so the same position may carry a different part number on an early or late build. The quantity column reflects the variant catalog reproduced here; if your engine plate shows a different rating or serial range, send it and we will confirm the correct number before shipping.
Ordering From This Drawing
Send the position numbers or part numbers you need, with the quantity per position. We quote
net price and freight to your port within 24 hours on working days. Parts are packed in export
cartons with the part number and quantity marked on each box; commercial invoice, packing list
and certificate of origin are supplied with the shipment.
- Quotation — within 24 hours, working days
- Minimum — single pieces accepted, quantity breaks on repeat orders
- Shipping — air for urgent items, sea freight for consolidated orders
- Documents — invoice, packing list, certificate of origin on request
Frequently Asked Questions
What does C/N mean in the parts list?
C/N is the position number printed on the drawing. Find the number next to the part on the illustration, then look up the same number in the first column of the table.
Are the quantities per engine or per set?
Quantities are per single engine assembly as listed in the catalog. If a position shows a quantity of 4, four pieces are needed for one engine.
Can you supply every position on drawing E0283007a0?
Yes. All 8 positions in the table can be quoted, and ordering several positions together normally reduces total freight.
What if my engine has a different part number for the same position?
MTU supersedes numbers over the service life of a series. Send the number on your engine and we check it against current factory parts information before anything ships.
Service Notes
This drawing carries protective cover, retainer, screw, washer and hex nut, among other positions. Crankcase work usually replaces the sealing rings and end-cover gaskets at the same time as the bearing shells. Bolts and studs in the main bearing area are renewed rather than reused, and sealing compound is applied to the joint faces.
Position numbers are only valid for this drawing. When ordering against a drawing, always
quote the drawing number together with the position, so the parts list can be matched exactly.
Other Drawings in This Group
The same gear train, belt drive group is covered by further drawings in the MTU 2000 series catalog: